| SHARE | | | |
  • General Terms and Conditions of Purchase (GTP) of QUANTIFOIL Instruments GmbH

    (hereinafter called „Q.Instruments“)


    1.     Commencement and scope
    1.1     With effect from January 1, 2012, all purchases and legal agreements concluded by Q.Instruments with its suppliers shall be subject exclusively to these General Terms and Conditions of Purchase (hereinafter called “the GTP”), insofar as these are not amended by means of individual written agreements. Furthermore, these GTP shall replace the previously valid general terms and conditions of purchase of Q.Instruments.
    1.2     General terms and conditions of business of the supplier (hereinafter called “the Supplier”) which contradict these GTP shall be applicable only insofar as Q.Instruments expressly approves these in writing.
    1.3     Q.Instruments reserves the right to amend these GTP at any time.

    2.     Offers made by the Supplier
    2.1     Following an enquiry by Q.Instruments, the Supplier shall be asked to submit an offer free of charge.
    2.2     The offer submitted by the Supplier must comply with the specifications and descriptions of Q.Instruments, and in the event of deviations must expressly draw attention thereto.
    2.3     The offer submitted by the Supplier must detail all secondary costs for taxes, fees, duties, packaging, transportation, royalties etc. which are to be incurred by Q.Instruments.
    2.4     If the Supplier does not expressly stipulate another deadline in his offer, his offer shall be binding for 100 (one hundred) days from the date of receipt by Q.Instruments.

    3.     Orders placed by Q.Instruments
    3.1     If the Supplier issues an order confirmation which deviates from the order, then Q.Instruments shall not be bound by this order confirmation without express approval.
    3.2     Orders, commissions and agreements as well as amendments or additions to the orders shall be binding for Q.Instruments only if these have been place in writing or concluded in writing by its authorised in-house managing officers.

    4.     Prices and payment
    4.1     The prices listed in the order by Q.Instruments shall essentially constitute fixed prices (without VAT) and are carriage free Jena, Germany.
    4.2     General price increases must be reported to Q.Instruments in writing at least two months before these come into effect. In the case of current orders, no price increases shall be possible.
    4.3     Payment shall be performed within 40 (forty) days following receipt of the product or services. In the event of ascertained defects, Q.Instruments shall reserve the right to withhold the payment.
    4.4     Payment does not mean the delivery or service has been recognised as being contractually compliant. In the event of a faulty or incomplete delivery or service, Q.Instruments shall to a reasonable extent and irrespective of all other rights be entitled to withhold payments on claims arising out of the business relationship until these have been properly fulfilled.
    4.5     Payments shall be performed, unless otherwise agreed, in Euro.
    4.6     Existing claims against Q.Instruments may not be assigned to third parties.

    5.     Quality, checks, notice of defects and repairs
    5.1     The Supplier guarantees adherence to the specifications and quality and other characteristics of the components demanded by Q.Instruments in its order.
    5.2     The Supplier is obliged to adhere to the technical data demanded for his goods in accordance with the documents upon which this order is based, such as drawings, technical terms and conditions of delivery, specifications, descriptions or samples.
    5.3     Q.Instruments shall be entitled to audit the Supplier once per annum. Q.Instruments shall moreover also have the right to conduct client audits and inspections by public authorities at the Supplier following prior notification, and if necessary to extend these to the relevant business premises of the Supplier.
    5.4     Should Q.Instruments ascertain that a change in quality has taken place without prior notification, then Q.Instruments shall have the right to reject the goods. The Supplier shall be liable for the direct and indirect losses incurred by Q.Instruments as the consequence of a change in quality which was not reported in good time.
    5.5     Product changes must be reported to Q.Instruments in good time and comprehensibly, and shall be deemed to constitute a contractual amendment request. Q.Instruments may reject these within the framework of the existing legal agreement.
    5.6     Product changes realised without prior notification shall be deemed to be in breach of contract, and shall entitle Q.Instruments to take the corresponding measures (acceptance refusal, price reduction, compensation, etc.).
    5.7     Insofar as these are known to the Supplier, production stops as well as the announced discontinuation of components by subcontractors (manufacturers) must be reported to Q.Instruments in good time.
    5.8     The Supplier shall be obliged support Q.Instruments on a cost basis (by prior agreement) in conjunction with the rectification of quality problems, or shall be obliged to perform these himself respectively.
    5.9     The duty of the ordering party to conduct checks and to issue defect notices immediately pursuant to § 377 HGB shall be contractually excluded. Defects in the delivered products (in quantitative and qualitative terms) must be reported as soon as these have been ascertained. The Supplier expressly waives the plea of overdue notice of defects or of approval. Q.Instruments may issue defect notices throughout the entire warranty period.
    5.10    If Q.Instruments returns defective goods, then Q.Instruments shall be entitled to reverse debit the invoice sum plus a flat-rate administrative charge of 5% of the price of the defective goods or at least EUR 100.00. Q.Instruments reserves the right to demonstrate that overheads were higher.

    6.     Delivery conditions
    6.1     The delivery must be performed on the agreed delivery deadline at the place of performance, although at the earliest 3 (three) working days before. The place of performance for all reciprocal obligations is the registered domicile of the company QUANTIFOIL Instruments GmbH in Jena, Germany.
    6.2     Unless otherwise agreed on a case-to-case basis, deliveries shall be performed DDP (Incoterms 2010).
    6.3     Excess deliveries or delivery shortfalls, partial deliveries or premature deliveries shall be subject to the prior approval of Q.Instruments.
    6.4     Q.Instruments may at any time with immediate effect and irrespective of its further rights withdraw from the Agreement and refuse to accept the delivery if:
        a) the delivery date confirmed by the Supplier is not adhered to;
        b) the specifications defined by Q.Instruments are not adhered to.

    7.     Packaging, delivery note, insurance, transfer of title
    7.1     The Supplier shall bear responsibility for the proper packaging, and must draw attention to any special circumstances pertaining to the removal thereof.
    7.2     A delivery note must be enclosed with each consignment, and this must contain at least the Q.Instruments order and article number(s).
    7.3     Transportation must be performed in accordance with the instructions of Q.Instruments.
    7.4     Title, benefits and risk of the delivered products shall be transferred to Q.Instruments after successful acceptance. In the event of deliveries involving installation or fitting, the risk shall be transferred only at the time of the successful acceptance by Q.Instruments. If the products are returned to the Supplier for any possible reason, the risk and liability shall be transferred to the Supplier once the products are ready for transport.
    7.5     Any extended or widened reservation of title is excluded.
    7.6     Insofar as the respective applicable law does not stipulate otherwise on a mandatory basis, the Supplier shall in all cases be exclusively responsible for adhering to all export, import, transit and control regulations and formalities.

    8.     Safety and environmental protection
    8.1     Delivered goods and rendered services must comply with the statutory provisions, in particular safety and environmental protection provisions.
    8.2     In the case of deliveries and the rendering of services, the Supplier shall have sole responsibility for adhering to the accident-prevention regulations. Protective equipment as well as any possible instructions of the manufacturer which are required under such regulations must be included with the delivery free of charge.

    9.     Guarantee and warranty
    9.1     The Supplier guarantees – in addition to the quality and characteristics – that the delivered product is free of material and production faults, is fully-operational, corresponds to all regulations in force at the place of destination and that the necessary certificates of conformity, approvals, permits etc. have been obtained.
    9.2     The guarantee period shall last 24 (twenty four) months from the date of delivery in Jena. The same full guarantee period shall in each case apply to replacement deliveries, subsequent rectifications and spare parts.
    9.3     If a product exhibits defects, then Q.Instruments shall be entitled to choose from amongst the following rights: conversion, compensation for the reduced value, delivery of defect-free replacement products and subsequent rectification. In urgent cases or if the Supplier fails to perform the correction demanded by Q.Instruments within the deadline imposed by Q.Instruments, Q.Instruments may procure a replacement for another source or may rectify the defect or may cause these to be rectified.
    9.4     If Q.Instruments has evidence that a similar defect affects all delivered products, then Q.Instruments may arrange for these to be replaced, even if the guarantee period has already expired.
    9.5     The costs resulting from the exercise of the rights shall be borne by the Supplier. Claims for compensation remain reserved in all cases.

    10.     Liability
    10.1    If the products damage Q.Instruments, its managing officers or employees, then the Supplier shall be obliged to provide comprehensive compensation.
    10.2    In the event of a claim being brought against Q.Instruments in conjunction with a product delivered by the Supplier, in particular on the grounds of a product liability law (incl. Switzerland, EU and USA), then Q.Instruments may without further ado disclose the name of the Supplier to the claimant. In addition, Q.Instruments shall be entitled to claim full compensation and recourse vis-à-vis the Supplier arising out of all expenses incurred in conjunction with any such claims. The Supplier shall procure satisfactory insurance cover.

    11.     Intellectual property
    11.1     The Supplier guarantees that the products delivered by him and the utilisation thereof do not breach any third-party intellectual property rights. He shall be comprehensibly liable for all consequences – whether relating to Q.Instruments or its customers – arising out of any such claimed or actual breach.
    11.2     Instructions issued by Q.Instruments in respect of the utilisation of Q.Instruments company designations and trademarks as well as the affixation thereof to the products must be adhered to.

    12.     Means of production
    12.1     All means of production (tools, drawings, models, etc.) which Q.Instruments makes available to the Supplier at its own expense are the property of Q.Instruments and must be designated correspondingly. These may be deployed only on behalf of Q.Instruments. Q.Instruments shall have the sole right of disposal over these items, and the Supplier must adhere to the instructions issued by Q.Instruments.
    12.2     To the extent that the means of production which have been wholly or partially paid for by Q.Instruments are in the possession of the Supplier, the Supplier shall be liable for the risk of their loss, destruction and damage. If the Supplier breaches his obligations, then Q.Instruments shall be entitled to dissolve all legal agreements with the Supplier with immediate effect. In addition, Q.Instruments shall be entitled to claim compensation as well as demand the surrender of the benefit (gross) generated by the Supplier.
     
    13.     Execution plans, manufacturing and maintenance documents
    13.1     Before production commences, the execution plans must be submitted to Q.Instruments upon request for approval. Approval by Q.Instruments shall not release the Supplier from his responsibility for the complete suitability and feasibility thereof.
    13.2    The definitive manufacturing and maintenance documents (execution plans, maintenance and operating regulations, lists of spare parts, etc.) must be held for safekeeping throughout the production term (max. 10 (ten) years after the final delivery), and must be placed at the disposal of Q.Instruments without pecuniary consideration in the event of the cessation of the production or the dissolution of the legal agreement. This applies to all manufacturing and maintenance documents.

    14.     Confidentiality
    14.1     All technical documents (means of production, data, drawings, software, etc.) which Q.Instruments makes available to the Supplier for the purpose of manufacturing the product, as well as all commercial documents (e.g. orders and the associated details) must be treated in a confidential manner and may be used only for the specific cooperation. This also applies to products which have been developed specially for Q.Instruments. All rights pertaining thereto shall be held exclusively by Q.Instruments. Upon request, all documents together with all copies and reproductions thereof must be surrendered to Q.Instruments without delay.
    14.2    The Supplier must treat his business relationship with Q.Instruments and all details pertaining thereto in a confidential manner.
    14.3    The Supplier shall also impose the aforementioned confidentiality obligations on his managing officers, employees and lawfully engaged third-parties.
    14.4    The aforementioned obligations shall also be applicable within the framework of contractual negotiations and following the end of the agreement. If the legal agreement is not concluded, or after the legal agreement has ended respectively, all presented or created documents of all kinds pertaining to the specific project must automatically be returned to Q.Instruments without delay.

    15.     Force majeure
    15.1    The Supplier shall not be liable for the non-performance or the poor performance of the legal agreement if this is attributable to events of force majeure.
    15.2    If the Supplier invokes force majeure, then he must inform the other Party without delay about the occurrence and the expected duration thereof. If he fails to do so, then he may not invoke force majeure.
    15.3    Upon request, the Supplier must provide Q.Instruments with written confirmation of the circumstances which in his view establish a case of force majeure.

    16.     Miscellaneous provisions
    16.1    The Supplier shall be obliged to inform Q.Instruments in writing without delay if significant changes to his control structure or ownership occur relative to the circumstances in force at the time of the conclusion of the legal agreement.
    16.2    In the event of differences between the various language versions of these CTC, the German version shall prevail.
    16.3    The waiving of requirement for written form is only valid in writing.
    16.4    Communications must be addressed to QUANTIFOIL Instruments GmbH, Loebstedter Str. 101, 07749 Jena, Germany.

    17.     Severability clause
    17.1     Should any of the individual provisions contained in this Agreement prove to be wholly or partially invalid or unenforceable, or should they subsequently become invalid or unenforceable as a consequences of changes in legislation which take place following the conclusion of the Agreement, then this shall not affect the other contractual provisions and the validity of the Agreement as a whole. Such invalid or unenforceable provisions shall be replaced by valid and enforceable provisions which approximate as closely as possible to the meaning and purpose of the invalid provisions. Should the Agreement prove to contain omissions, then the provisions shall be deemed to have been agreed which correspond to the meaning and purpose of the Agreement and which would have been agreed if this matter had been considered.

    All legal relationships between Q.Instruments and the Supplier are governed by German law, whereby the UN Sales Convention shall be excluded. The ordinary courts at the registered domicile of Q.Instruments shall have exclusive jurisdiction for the judicial assessment of all disputes between the Supplier and Q.Instruments. Q.Instruments shall however also be entitled to bring claims against the Supplier at the latter’s registered domicile.


    January 2012

    QUANTIFOIL Instruments GmbH
    Loebstedter Str. 101
    07749 Jena
    Germany