For microplates use only | |
|---|---|
| Microplates | 96-, and 384-well microplates, deep well plates, PCR plates (e.g Eppendorf®, Brandt®, Nunc®, Greiner Bio-One®) |
Supported microplate flange heights | 2.5 mm, 4.0 mm and 6.1 mm |
Mixing | |
| Mixing frequency | 200 to 3,000 rpm (microplates) |
| Mixing orbit | constant 2.0 mm diameter |
| Speed setting resolution | linear increments |
| Mixing regulation accuracy | ± 25 rpm |
| Zero position | Automatically controlled in the stopping process with final fixing Stopping time selectable from 3 sec (strong stopping) to 30 sec (soft stopping) |
| Zero position accuracy | ± 0.1 mm |
Plate locking ELM | |
| Open modus | Ready for free handling with robot gripper |
| Closed modus | Strong diagonal centered fixation |
ELM Position Accuracy | ± 0.1 mm |
Device control | |
Electronic control board | Completely accommodated in the smallest housing |
Controller | Micro controller (16-Bit-RISC-Prozessor) |
Operation control | Remote controlled |
User interface | RS232 interface |
| Status & alarm | LED in front (green = ok, red = alarm) |
Electrical | |
| Operating Voltages | 24 VDC input . Imax: 3.1 A . Peff: 15 Watt . Pmax: 75 Watt |
| External power supply | External power supply unit (CE/UL/CSA approved, 85-264 VAC, 47-63 Hz, 120W, IEC/EN60320-1 C14) |
Properties | |
| Housing Material | Aluminum anodized |
| Environment operating range | +5°C to 45°C (80 % max. relative humidity) |
| Dimensions (W x D x H) | 142 mm x 99 mm x 48.2 mm |
| Weight | 1.5 kg (3.3 lbs) |
Dimensions
